Finding the right combination of pins in a male/female connector which will match your Eurocard power input requirements is now made easier with these 2E Syscom connectors. Based on the DIN 41612 specifications, these are supplied as 2 and 3 pin modules that snap together (20 A/pin 750V version shown). The backplane half is the female connector to provide complete protection for hot pins. The male connector solder pins are at 90 to the contact pins and have 2 pins per contact for board hole diameters of 1.6mm. The contact side of the pins are offset by 1.27mm to the center of the contact strip. Standard H11 and H15 connectors which provide 11 pins at 20A/pin or 15 pins at 15A/pin, are also available from 2E Syscom.