The TecSYS VPX Development Platform developed by Verotec addresses the issue of the lack of a suitable entry-level development platform that provides a basic physical environment for software development and board integration. Assembled from standard building blocks, the TecSYS is user-configurable around the default options. It is available in two versions: a 6U high enclosure for 3U board systems and as a 9U unit for 6U boards. Originally developed for VPX, TecSYS is modular and scalable; users can specify backplane and PSU options appropriate for VMEbus, VME64x and cPCI systems. Delivery times for all variants are short, reducing time to market. All standard integrated systems can be seen here.
The default 3U TecSYS VPX system is housed in a 10.5 inch half width 6U, 322mm deep Diplomat enclosure, which is configured with a 2U plenum chamber at the bottom, a 3U KM6-RF subrack in the middle and a 1U air exhaust chamber at the top. The heart of the system is a 5-Slot 3U full mesh X4 PCI Express VITA 46.4 backplane, which also provides VITA 46.10 RTM capability, an important consideration for I/O, which is easily accessed through a removable rear panel; the top cover is also readily removable for improved access. The backplane provides System Management and JTAG Interfaces; it gives fat pipe communications between all five slots and provides an interface with one of the most widely used architectures, PCI Express. Pluggable PSUs with two independent converters operating in parallel provide 30A at 5V and 40A at 3.3V simultaneously.
Verotec Inc
PO Box 469
Londonderry
New Hampshire 03053
Tel: 603.821.9921
Fax: 603.821.9923
[email protected]
www.verotec.us
