VITA Technologies
  • VME
  • XMC
  • FMC
  • PMC
  • VNX
  • VPX
Menu
  • VME
  • XMC
  • FMC
  • PMC
  • VNX
  • VPX
  • Articles
  • White Papers
  • Products
  • News
Menu
  • Articles
  • White Papers
  • Products
  • News
  New Products  Highly configurable Eurocard rackcases save U height
New Products

Highly configurable Eurocard rackcases save U height

VerotecVerotec—June 24, 20130
FacebookTwitterPinterestLinkedInTumblrRedditVKWhatsAppEmail
More stories

Pentek Introduces Onyx Virtex-7 Software Radio Module for Extremely Wideband Signal Applications

April 3, 2014

ORBexpress Extends Support to Wind River’s VxWorks 6.9 RTOS with Improved Multicore Capability

September 19, 2011

Rugged COM Express Module with AMD V1000

April 27, 2018

Curtiss-Wright Controls Introduces Industry’s First NVIDIA(r) GPGPU OpenVPX(tm) Engine based on NVIDIA Fermi architecture

June 29, 2011



The Eurocard 19-inch rackcase family from Verotec enables single or multiple 160 or 220mm deep 3U, 6U and 9U standard Eurocards to be mounted horizontally, saving valuable height in the rack or enclosure. Available in 1U and 2U high versions and with depths of 10.6 or 14.6 inches (270 or 370mm), the Eurocard rackcases provide either 6HP or 12HP height, enabling multiple cards to be housed if required. The units are extremely versatile. They can be set up to house three x 3U PCBs, one 3U and one 6U or a single 9U card. In the multiple configuration units, different depths can be installed in each section. In all versions, the robust KM6-HD front tiebars can be either IEEE1101.10 for compatibility with the injector/ejector handles required by bus structures such as VME64x and CompactPCI, or IEC297 compatible for general-purpose applications. The front and rear tiebars are secured to the top and base, which are pre-punched with holes in the appropriate positions for different sized Eurocards.

At the front, an extruded aluminium bezel, finished in conductive Iridite NCP, provides a 9U wide aperture and the standard 19-inch rack mounting fixing holes. A channel in the base of the aperture allows a 9U wide stainless steel conductive gasket to be installed if enhanced shielding is required. The rear panel is fitted with a 6 x 1 inch (150 x 25mm) cable entry gland plate and the sides of the unit have an EMC-compatible ventilation hole pattern. The heavy-duty clip-in card guides are available in 160 and 220mm depths; they can be fitted with PCB grounding clips and ESD front panel clips if required, and screwed down if increased strength and resistance to shock and vibration is needed. A 160mm card guide with a 0.5HP offset for CompactPCI PSUs is available.

FacebookTwitterPinterestLinkedInTumblrRedditVKWhatsAppEmail
X-ES Ships Secure 3U VPX Ethernet Switches and Routers
Mercury Systems Receives $1.6M in Multiple Orders for Radar Environment Simulation Systems
Related posts
  • Related posts
  • More from author
Eletter Products

SPONSORED: SpaceVPX Solutions From Pixus Technologies

May 28, 20250
Eletter Products

SPONSORED: Mission-Ready Chassis Management Aligned to SOSA®

May 28, 20250
Eletter Products

SPONSORED: 2300W Intelligent VPX Power Supply

May 21, 20250
Load more
Read also
Eletter Products

SPONSORED: SpaceVPX Solutions From Pixus Technologies

May 28, 20250
Eletter Products

SPONSORED: Mission-Ready Chassis Management Aligned to SOSA®

May 28, 20250
Eletter Products

SPONSORED: 2300W Intelligent VPX Power Supply

May 21, 20250
Eletter Products

SPONSORED: Small Scale 4 Slot OpenVPX and SOSA Aligned System Development

May 21, 20250
Eletter Products

SPONSORED: 3U VPX HD Switch Doubles Backplane Density

May 14, 20250
Eletter Products

SPONSORED: Rugged 1/2 ATR Aligned to SOSA, CMFF and SAVE Ready

January 30, 20250
Load more

Recent Comments

No comments to show.
  • Articles
  • White Papers
  • Products
  • News
Menu
  • Articles
  • White Papers
  • Products
  • News
  • VME
  • XMC
  • FMC
  • PMC
  • VNX
  • VPX
Menu
  • VME
  • XMC
  • FMC
  • PMC
  • VNX
  • VPX

© 2023 VITA Technologies. All rights Reserved.