Pentek, Inc., today introduced the Model 71610 digital I/O module with LVDS (low-voltage differential signaling) I/O connected to a Virtex-6 FPGA. This Cobalt® module provides 32 LVDS differential input or output pairs plus LVDS clock, data valid and flow control signals via an easy access front panel 80-pin connector routed to the Virtex-6 FPGA.
LVDS is a general purpose digital interface operating at very high speeds over inexpensive twisted-pair or flat ribbon copper cables. It is popular for many common control or data capture applications such as high-speed video, graphics, video camera data transfers and general purpose computer buses. The standard built-in data capture and data generation facilities of the Model 71610 make it an ideal turnkey solution for developing and deploying custom FPGA processing algorithms.
Data can be pulled from devices such as sensors, data converters, custom digital systems or spectrum analyzers and then processed, decoded or formatted in the Virtex-6 FPGA before delivery to the host system processor. Likewise, signals from the host can be processed and formatted by the FPGA before delivery to the LVDS output.
“The LVDS interface gives developers a low-level interface that is highly configurable to handle many types of unique interface requirements,” said Rodger Hosking, vice president of Pentek. “This module is ideal for custom I/O, which can be tailored to match a wide range of different LVDS peripheral devices.”
The Model 71610 is a VITA 42 XMC (switched mezzanine card) module that can plug into carriers such as VPX, CompactPCI, AMC (Advanced Mezzanine Card) and PCI Express. The Model 71610 supports x4 PCIe on the primary P15 XMC connector. The secondary P16 XMC connector supports dual 4X or single 8X user-installed gigabit serial interfaces, such as Aurora, PCIe or Serial RapidIO. The Model 71610 has an optional PMC P14 connector with 20 pairs of LVDS connections to the FPGA for custom I/O to the carrier.
Multiple Virtex-6 FPGA options are available so developers can select the best match for their processing and environmental requirements. The Virtex-6 is ideal for encoding/decoding, modulation/demodulation, encryption/decryption and channelization of signals between transmission and reception. 2GB of DDR3 SDRAM provides ample memory buffer space for transient capture, digital delays, DMA packet formation and signal processing algorithms.
Supporting Features and Products
Pentek GateFlow FPGA Design Kits allow users to develop and install their own custom IP for data processing. The kits include full VHDL source code for factory installed intellectual property (IP) functions, so developers can easily add new functions by incorporating additional FPGA IP modules.
Pentek’s ReadyFlow board support packages, with high-level C-callable library functions and device drivers, are available for Windows and Linux operating systems.
Form Factors, Pricing and Availability
For the latest pricing and availability information, please contact Mario Schiavone by phone at (201) 818-5900 ext.229, or by email at [email protected].
About Pentek
Pentek, an ISO 9001:2008 certified company, designs, manufactures and markets innovative COTS and rugged DSP boards and system recorders for commercial, government and military systems, including radar, communications, medical and industrial control applications. Pentek offers powerful VME, VPX, VXS, PMC, XMC, cPCI, PCI, PCIe and AMC boards for data acquisition, software radio and digital signal processing featuring Xilinx FPGAs. Pentek’s high-speed real-time recording systems are pre-configured and can be used in the lab or deployed in the field. Pentek equips all boards and recorder products with high-performance I/O including gigabit serial interfaces, powerful software development tools and offers strong DSP software support.
###
Pentek and Cobalt are trademarks or registered trademarks of Pentek, Inc. Brand or product names are registered trademarks or trademarks of their respective holders.
For access to the release and data sheets, please visit: www.pentek.com/whatsnew/viewrelease.cfm?index=1[…]
North American Sales Contact: Mario Schiavone, Pentek, Inc., One Park Way, Upper Saddle River, NJ 07458-2311; Telephone 201-818-5900, ext. 770; Fax 201-818-5904; Email [email protected]; Website www.pentek.com.
International Sales Contacts: Galleon Embedded Computing in Germany at (49) 89 5908 2101, LVD Systems in Italy at (39) 011 966 1319, RECAB AB in Sweden at (46) 8 6830300, Advanced Embedded Systems in the UK, Spain and Portugal at (44) 0 1202 885 675, Sela Electronic Systems in Israel at (972) 3 6479969,MISH International in Japan at (81) 42-538-7650, Beijing Betaone Sysjob Ltd. in China at (86) 10 82784106 and Acetronix Co. Ltd. in Korea at (82) 24202343, ext. 106, Dynamic C4 Pte. Ltd. In Singapore, Malaysia and Indonesia at (65) 6405 4506. For a list of Pentek representatives and distributors, please visit www.pentek.com/contact/replist.pdf.