|
|
| cold plate application |
|
|
| 19 inch rack version |
PCI-SYSTEMS Inc., releases a new line of Solid State Power Controller boards and chassis.
January 22, 2018
Sunnyvale, CA — PCI-SYSTEMS Inc., a leading supplier of conduction cooled systems, today announced a new line of Solid State Power Controllers.
Key Features of the +/- 70VDC POWER DISTRIBUTION UNIT
• +/- 70VDC Continuous Input/Output Voltage
• Sixteen independent +/- channels at 15A, 20A max. each
• Trip current and ON/OFF, trip reset capability for each channel
• VITA 83 compliant
• Channel sequencing with user defined delays,
• Ethernet interface, Dual RS485 interfaces for control
• Optional CANbus and MILbus 1553 interface
• Dual Voltage (+/-) Tracking for each channel
• Measurements of Input, output voltage, output current for each channel
• Trip/Fault Status (if Over Current / Short Circuit)
• Friendly WINDOWS based GUI to set up and monitor all system parameters
The Power Distribution Unit (PDU) primarily receives +/-70 VDC power as input from the main platform and distributes it as same +/-70 VDC to the subsystems having different current loads. The power input to the individual subsystem is controlled remotely through a set of commands sent on several interface options. The PDU is conduction cooled and suitable for use in mission critical rugged applications.
There are sixteen independent channels. Each of them is independently programmed for power ON/OFF capability. Power monitors used in each channel performs measurements of Current, Voltage, Power and Energy with 12-/16-Bit ADC with ±0.7% of total error. Programmable current limit is 2% accurate. PDU provides MOSFET power limiting with current foldback, continuously monitors MOSFET health, stores Minimum and Maximum measurements, alerts when thresholds exceeded, provides input Overvoltage/Undervoltage protection.
The COMe CPU module provides Channel sequencing with user defined delays. All settings and configuration are stored into internal mSata SSD for nonvolatile configuration.
PCI-SYSTEMS Inc. develops and manufactures COTS and CUSTOM intelligent VPX Systems, Power supply, CPU and peripheral boards as well as advanced mechanical design solutions in the US and Europe for many platforms that provide precision control of robotic and automated equipment in the semiconductor, medical and industrial equipment markets as well as for ruggedized embedded OEM applications in airborne and defense applications.
