VITA Technologies
  • VME
  • XMC
  • FMC
  • PMC
  • VNX
  • VPX
Menu
  • VME
  • XMC
  • FMC
  • PMC
  • VNX
  • VPX
  • Articles
  • White Papers
  • Products
  • News
Menu
  • Articles
  • White Papers
  • Products
  • News
  Consortia and Working Groups  VITA standards activity updates
Consortia and Working GroupsNews

VITA standards activity updates

Jerry Gipper, Editorial DirectorJerry Gipper, Editorial Director—June 3, 20250
FacebookTwitterPinterestLinkedInTumblrRedditVKWhatsAppEmail

Note: This update is based on the results of the May 2025 VITA Standards Organization (VSO) meeting, held in Frederick, Maryland, and hosted by Leonardo DRS.

Contact VITA if you are interested in participating in any of these working groups. The full reports can be accessed at www.vita.com/StandardsUpdates. Visit the VITA website (http://www.vita.com) for details on upcoming VITA meetings.

ANSI accreditation

Accredited as an American National Standards Institute (ANSI) developer, VITA provides its members with the ability to develop and promote open technology standards.

The following standards have recently been ANSI and VITA approved via public VITA consensus ballot:

  • ANSI/VITA 46.31-2025, Higher Data Rate VPX –  Solder Tail in Blind via
  • ANSI/VITA 47.1-2025, Common Requirements for Environments, Design and Construction, Safety, and Quality Standard
  • IEEE Std 2818-2024/VITA 51.4-2024, Reliability Component Stress Analysis and Derating
  • ANSI/VITA 68.0-2025, VPX Compliance Channel Standard
  • ANSI/VITA 68.1-2025, VPX Compliance Channel – Fixed Signal Integrity Budget Standard
  • ANSI/VITA 86-2025, High Voltage Input Sealed Connector Power Supply

All published standards are available for download by VITA members and are posted at the online VITA Store for purchase by nonmembers.

VSO study and working group activities

Standards within VITA may be initiated through the formation of a study group and developed by a working group. A study group requires the sponsorship of one VITA member, while a working group requires sponsorship of at least three VITA members.

Several working groups have current projects underway. Here’s a roundup of these projects:

VITA 47.2 and .3: Class 2 Requirements for Environments, Design and Construction, Safety, and Quality for VITA 47 Plug-In Modules Dot Standard

Abstract: The VITA 47 group of standards defines environmental, design and construction, safety, and quality requirements for commercial off-the-shelf (COTS) plug-in modules intended for ground and aerospace applications. This revision enables a broader use of these standards across the COTS supplier market with added flexibility in environmental class options. It also corrects typographical errors, adds additional requirements for conformance to improve interoperability and maintainability, and enables rugged design for tactical applications.

Status: Multiple additions and changes are being made to improve the usability of this standard. The revision drafts are in review.

VITA 48.5: Mechanical Standard for VPX REDI AFT Cooling – Multi Pitch Air Flow Through Cooling, 1.52″ Pitch

Abstract: This standard establishes the design requirements for an air-flow-through (AFT) cooled plug-in unit. Unlike ANSI/VITA 48.1, which uses cooling air impinged directly upon the components and circuit boards, this plug-in unit uses a compact core heat exchanger located within the central heat sink of the unit and uses a mil-/aero-qualified seal on the inlet and outlet of the heat exchanger, eliminating any direct air contact with the PWB and components. This seal also provides the ability for chassis-level flow balancing, allowing plug-in units with different cooling requirements in the same chassis. This standard defines both a 3U and 6U form factor in various pitches and air inlet sizes, providing a high-performance thermal solution for existing or new CCA [conduction-cooled assembly] designs.

Status: This standard is open for revisions to more clearly define some of the rules and recommendations. Verification method notation being added.

VITA 48.9: VPX AFT Cooling – Retractable Seals

Abstract: This standard defines an air-flow-through module format, 3U and 6U, that uses retractable module rack seals to improve module-chassis seal durability, simplifies the design by eliminating tapered module and chassis features, and allows easy migration of existing CCA designs to an air-cooled module format.

Status: Working group is developing a draft document.

VITA 65.x: OpenVPX System Standard

Abstract: The OpenVPX standard uses plug-in module mechanical, connectors, thermal, communications protocols, utility, and power definitions provided by specific VITA standards to define a series of slot, backplane, module, and standard development chassis profiles.

Status: This document is in public ballot for release.

VITA 67.3: VPX: Coaxial Interconnect on VPX, Spring-Loaded Contact on Backplane

Abstract: The VITA 67.3 standard defines an open standard for configuration and interconnect (within the structure of VITA 67.0) enabling an interface compatible with VITA 46 containing multiposition blind-mate analog connectors with coaxial contacts, having fixed contacts on the plug-in module and spring action on the backplane.

Status: Now open for modifications to SMPS interface.

VITA 78.x: SpaceVPX System

More stories

TEWS Technologies Launches TXMC897 Switched Mezzanine Card for Enhanced Ethernet Connectivity

January 10, 2024

VITA announces formation of VITA 100 working groups

January 13, 2025

Call for Consensus Body Members to Reaffirm ANSI/VITA 67.1-2019 – Coaxial Interconnect on VPX, 4 Position SMPM Configuration

January 28, 2025

2024 VITA TECHNOLOGIES APPLICATION GUIDE

November 29, 2023

Abstract: This document describes an open standard for creating high-performance fault-tolerant interoperable backplanes and modules to assemble electronic systems for spacecraft and other high-availability applications. Such systems support a wide variety of use cases across the aerospace community. This standard leverages the OpenVPX standards family and the commercial infrastructure that supports these standards.

Status: The standard is open for revisions to the 2022 edition.

VITA 89: MT Circular Connectors – Type 2

Abstract: The VITA 89 MT circular connector standard defines a standard for circular connectors with optical MT. Circular connector shells are compliant to MIL-STD-38999. MT offers options for up to 48 fibers per MT and for physical contact or lensed MT.

Status: VITA working group to develop a new standard for circular connectors with optical MT. Working group is developing draft document.

VITA 90.x: VNX+

Abstract: The VITA 90.x (VNX+) family of standards builds on the foundation established by VITA 74 VNX. VNX+ significantly increases performance and system versatility beyond VITA 74, while following its mechanical framework.

Status: VITA 90.0 is in public review for release. Working groups are developing drafts for each level of VNX+.

VITA 91: System Standard for Higher Density VITA 46 Applications

Abstract: This standard defines a system definition that provides higher pin density to the backplane for VPX applications.

Status: VITA working group to develop a new standard for higher pin density for VPX.

VITA 92: High Performance Cable – Ruggedized 10 Gbaud Bulkhead High Speed, D- Sub, Rectangular Connector for Copper Cables

Abstract: This standard defines a rugged standardized 10 Gbaud interconnect system with a high pin count and high-density, lightweight, rectangular connector (meets MIL-DTL-24308 physical envelope) for I/O. It can support multiple high- bandwidth protocols and power while optimizing SWaP [size, weight, and power] benefits in smaller systems with limited panel space availability.

Status: The working group is reviewing a draft document.

VITA 93.x: QMC – Small Form Factor Mezzanine

Abstract: This standard defines a Small Form Factor mezzanine (SFFm) that is significantly smaller than XMC with host and I/O interface connectors. The host interface supports modern high-speed serial fabrics. The I/O interface supports either front-panel or backplane I/O. Multiple SFFm modules can be installed on various carrier-card form factors including 3U/6U Eurocards (VPX, cPCI, VME, etc.), VNX+, PCIe expansion cards, and others. It is suitable for deployment in commercial, industrial, space, or military-grade rugged environments with air-cooled or conduction-cooled formats.

Status: VITA 93.0 is open for public review ballot to release.

VITA 94.0-2024xNew: Power Distribution Plug-In Module

Abstract: This standard provides requirements for building a power distribution plug-in module with digital controls that can be used in a VPX chassis. The plug-in module will fit within the standards envelope defined for VPX modules in the VITA 48.x standards.

Status: Working group is developing a draft document.

VITA 95.0: Circular 38999 Connector with EBO Fiber Technology

Abstract: This document defines a standard for circular connectors with Expanded Beam Optical (EBO) ferrules. Circular connector shells are compliant to MIL-STD-38999 Series III. EBO ferrules are available in multimode or single mode.

Status: Working group is developing a draft document.

VITA 96.0: Backplane Connectors with EBO Fiber Technology

Abstract: This document defines a standard for Backplane Connectors with Expanded Beam Optical (EBO) ferrules. EBO ferrules are available in multimode and singlemode..

Status: Working group is developing a draft document.

VITA 100.x: VITA 100

Abstract: The VITA 100 suite of standards is an evolution to OpenVPX, VPX, and related mechanical standards while embracing a paradigm shift in technology and capability with at least double the pin density, speed, and power for electrical contacts.

Status: Working group is developing draft documents.

For a complete list of VITA standards available for purchase and their status, go to https://www.vita.com/Standards.

MOSASOSAVITA Standards
FacebookTwitterPinterestLinkedInTumblrRedditVKWhatsAppEmail
Leveraging AI in standards
Embedded Tech Trends 2025 Wrapup
Related posts
  • Related posts
  • More from author
Articles

Next-gen fiber optics for aviation: Expanded Beam performance with VITA 95/96

June 3, 20250
Articles

Embedded Tech Trends 2025 Wrapup

June 3, 20250
Articles

Leveraging AI in standards

June 3, 20250
Load more
Read also
Articles

Next-gen fiber optics for aviation: Expanded Beam performance with VITA 95/96

June 3, 20250
Articles

Embedded Tech Trends 2025 Wrapup

June 3, 20250
Articles

Leveraging AI in standards

June 3, 20250
Eletter Products

SPONSORED: SpaceVPX Solutions From Pixus Technologies

May 28, 20250
Eletter Products

SPONSORED: Mission-Ready Chassis Management Aligned to SOSA®

May 28, 20250
Eletter Products

SPONSORED: 2300W Intelligent VPX Power Supply

May 21, 20250
Load more

Recent Comments

No comments to show.
  • Articles
  • White Papers
  • Products
  • News
Menu
  • Articles
  • White Papers
  • Products
  • News
  • VME
  • XMC
  • FMC
  • PMC
  • VNX
  • VPX
Menu
  • VME
  • XMC
  • FMC
  • PMC
  • VNX
  • VPX

© 2023 VITA Technologies. All rights Reserved.