Third generation low dissipation PowerQUICC II® . The VSBC-6848 VME Single Board Computer is based on the MPC8248 processor running at 400 MHz with only 1.5 Watt, rated ta 760 DMIPS. This new VME board is the perfect replacement solution for all older VME boards designed around 68k and PowerPC 603/604 processors now in End of Life from MOTOROLA Computer Group.
Features
•Motorola PowerQUICC II® MPC8248
•760 DMIPS @ 400 MHz
•Security engine
•SO-DIMM 64 bits SDRAM module
•16 MByte FLASH
•1 MByte dual-port SRAM
•256 kbit serial EEPROM for user application
Communication
•Two Fast Ethernet ports on the front panel
•One RS-232 console port on the front panel
•Two high-speed serial port supporting RS-
422/485 mode
•One USB master interface & one UART console
port
Additional functionalities are available through the two PMC extension slots for 32-bit PMC’s, and eight general purpose TTL I/Os. One non volatile 256 kbit EEPROM is available for user parameters.
The board is compatible with the VME specification rev. C and require only 5V power supply, with less than 1.5 A of current (Typical power dissipation is only 6 Watt without PMC’s & CompactFlash. The VSBC-6848 supports a complete VME-32 interface for master and slave accesses with bus arbiter, interrupt handler and DMA controller functions.
For software support the board is shipped with ECMON monitor and BSP’s are available for LINUX and VxWorks RTOS.
For more information contact Serge Roussel at ACTIS Computer, Inc. 480-838-1799 or visit our site at www.actis-computer.com