Irvine, CA – December 03, 2008 – Solarflare Communications, the leading provider of standards-compliant 10 Gigabit Ethernet (10GbE) silicon, today announced general availability of its second-generation 10GBASE-T PHY product to switch and server customers, including original design manufacturers (ODMs). The 10Xpress® SFT9001 has completed extensive package and silicon reliability testing to support volume production of forthcoming 10GBASE-T switch and adapter products. The SFT9001 is the industry’s lowest-power 65nm 10GBASE-T PHY and is the second product from Solarflare that exceeds all the IEEE 802.3an 10GBASE-T specifications. At half the power consumption of other offerings, the chip has multiple power modes including a sub 4 watt low-power mode, radically changing the game for the deployment of ubiquitous 10GbE.
Solarflare’s standards-compliant PHY supports 100-meter reach over copper Ethernet cabling and features triple-speed, auto-negotiation for 10GBASE-T, 1000BASE-T and 100BASE-TX. Leveraging the architecture of the previously-shipped SFX7001 PHY, the SFT9001 supports both new and existing copper cabling specified for deployment in building networks, including unshielded Category 5E, Category 6, Category 6A and Category 7. Due to its support for previous lower speeds of Ethernet and legacy copper cabling, 10GBASE-T enables IT managers to upgrade to 10GbE, while preserving investments in current infrastructure.
The company’s chip comes in a very small package and consumes 50 percent less power than other offerings as a result of Solarflare’s proprietary advanced noise cancellation architecture. This architecture includes patented low-power echo suppression and superior immunity to noise from cell phones, which has plagued other 10GBASE-T implementations. Other key features of the PHY include power scaling down to hundreds of milliwatts and support for Wake-on-LAN, both critical for making network equipment power efficient. In addition, Solarflare’s PHY provides 10GBASE-T advanced cable diagnostics to help ease deployment and reduce network downtime by assessing line characteristics. With 10GBASE-T, IT managers finally have the familiar plug and play ease-of-use of RJ-45 connectivity, as well as the ability to run 10GbE on existing installed cabling, which is vital for broad market adoption.
“There are several factors driving up demand for 10GbE, including server virtualization, high-performance computing, storage convergence, video on demand and algorithmic market trading,” said Russell Stern, CEO of Solarflare. “Our customers continue to tell us low power, robustness, reliability and standards compliance are important factors for 10GbE solutions. We have repeatedly proven that our products excel in meeting these four criteria. At less than 4 watts, this is the lowest-power 10GBASE-T part on the market and we are now the only company to have shipped two generations of PHY products that run at distances exceeding 100 meters under worst-case channel conditions.”
“Delta Networks is leading the switch market with high-density 10GBASE-T products. The low power, as well as the performance and robustness of Solarflare’s SFT9001 PHY product, enables us to design and deliver high-density 10GBASE-T switches to our customers on time,” said Sam Liang, chairman at Delta Networks Inc.
About Solarflare® 10 Gigabit Products
Solarflare designs and develops the highest-performing, lowest-power, standards-compliant 10GbE controllers and 10GBASE-T transceivers on the market. Optimized for all key virtualization platforms including Citrix XenEnterprise, Microsoft’s Hyper-V and VMware’s ESX server, Solarflare’s Solarstorm® Ethernet controller consumes less than 2.0 watts at full line-rate performance delivering the optimal balance in performance and power efficiency. Solarflare’s 10Xpress® 10GBASE-T PHY supports distances of greater than 100 meters on UTP Category 6A cabling, 100 meters on STP Category 6, 55 meters on UTP Category 6, and 45 meters on UTP Category 5E cabling. When combined on a server adapter, Solarflare’s 10Xpress 10GBASE-T PHY and Solarstorm 10GbE controller deliver 10 times the performance of a 1 Gigabit NIC at half the power consumption of previous 10GbE server adapters. For additional product information and pricing, send a request to [email protected].
About Solarflare Communications, Inc.
Solarflare Communications is a semiconductor company delivering the next level of high-performance 10 Gigabit Ethernet (10GbE). As the leading provider of standards-compliant 10GbE silicon, Solarflare’s robust and power-efficient solutions are cost effective and easy to deploy. Now real and ready for primetime, Solarflare 10 Gigabit Ethernet makes possible next-generation applications such as streaming rich media, Web 2.0, server virtualization and network convergence. Solarflare is working with key industry partners and customers to ensure interoperability and drive a complete 10GBASE-T ecosystem. The privately held company is headquartered in Irvine, California, with a development center in Cambridge, UK, and has announced relationships with Accton, Citrix, CommScope, Delta, Ixia, Panduit, SMC and VMware.