February 2008 — Carrollton, TX USA – Picker Components Corp introduces the PC740 featuring large Silver alloy contacts and heavy multi-stranded swinger wires all the way down to the contacts to carry the current load and reduce the heat in the springs.
The PC740 is available in a 2 pole or 3 pole configuration with mounting configurations of Top Flange, Side Flange and Plain Case. Connections are via .250” quick connect terminals.
UL has rated the NO (Normally Open) and NC (Normally Closed) contacts of the PC740 the same. The 2 pole version is rated at 40A, 250VAC General Purpose and Resistive Load and 2HP 240VAC Motor. The 3 pole version is rated 30A, 250VAC General Purpose and Resistive Load. AC and DC coils are available in standard voltages.
The PC740 is designed for applications driving motors and actuators, battery chargers, heater elements, industrial controls and safety circuits.
Physically the PC740 measures 55.2mm x 52.0mm and 38mm plus mounting tabs. The DC coil consumes 2.5 Watts and the AC coil version consumes 5.5 VA. The PC740 has a service life of 100,000 cycles. The Dielectric Strength is 2,500 Vrms, for 1 minute between coil and contacts.
The Manufacturers Suggested List Price at 100 pcs is $9.95 and delivery is approximately 8-10 weeks. Engineering samples and a complete data sheet are available from Picker Components at 888-997-3933 or www.pickercomponents.com.
Picker Components Corp, a wholly owned subsidiary of Omni Pro Inc, manufacturers a broad offering of automotive, power, general purpose, printed circuit board, signal and solid state relays. Picker Components is supported by a nationwide network of Sales Representatives and Distributors whose goal is to provide the OEM with the right relay for their application.
Sales and Engineering Contact: Bill Bratly
[email protected]
888-997-3933
Company Information:
Picker Components Corp
3220 Commander Drive, Suite 102
Carrollton, TX 75006 USA
Phone: 888-997-3933