Note: This update is based on the results of the September 2025 VITA Standards Organization (VSO) meeting, held in Torrance, California, and hosted by Intellisense Systems.
Contact VITA if you are interested in participating in any of these working groups. The full reports can be accessed at www.vita.com/StandardsUpdates. Visit the VITA website (http://www.vita.com) for details on upcoming VITA meetings.
ANSI accreditation
Accredited as an American National Standards Institute (ANSI) developer, VITA provides its members with the ability to develop and promote open technology standards.
The following standards have recently been ANSI and VITA approved via public VITA consensus ballot:
- ANSI/VITA 47.2-2025, Class 2 Requirements for Environments, Design and Construction, Safety, and Quality for VITA 47 Plug-In Modules Dot Standard
- ANSI/VITA 47.3-2025, Class 3 Requirements for Environments, Design and Construction, Safety, and Quality for VITA 47 Plug-In Modules Dot Standard
- ANSI/VITA 65.0-2025, OpenVPX System Standard
- ANSI/VITA 67.3-2023, Coaxial Interconnect on VPX – Spring-Loaded Contact on Backplane
- ANSI/VITA 93-2025, QMC – Small Form Factor Mezzanine
All published standards are available for download by VITA members and are posted at the online VITA Store for purchase by nonmembers.
VSO study and working group activities
Standards within VITA may be initiated through the formation of a study group and developed by a working group. A study group requires the sponsorship of one VITA member, while a working group requires sponsorship of at least three VITA members.
Several working groups have current projects underway. Here’s a roundup of these projects:
VITA 46.32: VPX Connector Supporting 56 Gbaud Class Data Rates
Abstract: This standard defines a VPX connector that supports data rates to 56 Gbaud, for protocols such as 200GBASE-KR4 Ethernet and PCIe Gen 5. These connectors are intermateable to legacy VITA 46.X backplane connectors and follow the same form factor.
Status: Working group is developing a draft document.
VITA 48.5: Mechanical Standard for VPX REDI AFT Cooling – Multi Pitch Air Flow Through Cooling, 1.52″ Pitch
Abstract: This standard establishes the design requirements for an air-flow-through (AFT) cooled plug-in unit. This plug-in unit uses a compact core heat exchanger located within the central heat sink of the unit and uses a mil-/aero-qualified seal on the inlet and outlet of the heat exchanger, eliminating any direct air contact with the PWB and components. The standard defines both a 3U and 6U form factor in various pitches and air inlet sizes, providing a high-performance thermal solution for existing or new CCA [conduction-cooled assembly] designs.
Status: This standard is open for revisions to more clearly define some of the rules and recommendations. Verification method notation being added.
VITA 48.9: VPX AFT Cooling – Retractable Seals
Abstract: This standard defines an AFT module format, 3U and 6U, that uses retractable module rack seals to improve module-chassis seal durability, simplifies the design by eliminating tapered module and chassis features, and allows easy migration of existing CCA designs to an air-cooled module format.
Status: Working group is developing a draft document.
VITA 65.x: OpenVPX System Standard
Abstract: The OpenVPX standard uses plug-in module mechanical, connectors, thermal, communications protocols, utility, and power definitions provided by specific VITA standards to define a series of slot, backplane, module, and standard development chassis profiles.
Status: This document is open for additions of new profiles.
VITA 78.x: SpaceVPX System
Abstract: This document describes an open standard for creating high-performance fault-tolerant interoperable backplanes and modules to assemble electronic systems for spacecraft and other high-availability applications. Such systems support a wide variety of use cases across the aerospace community. This standard leverages the OpenVPX standards family and the commercial infrastructure that supports these standards.
Status: The standard is open for revisions to the 2022 edition.
VITA 89: MT Circular Connectors – Type 2
Abstract: The VITA 89 MT circular connector standard defines a standard for circular connectors with optical MT. Circular connector shells are compliant to MIL-STD-38999. MT offers options for up to 48 fibers per MT and for physical contact or lensed MT.
Status: VITA working group to develop a new standard for circular connectors with optical MT. Working group is developing draft document.
VITA 90.x: VNX+
Abstract: The VITA 90.x (VNX+) family of standards builds on the foundation established by VITA 74 VNX. VNX+ significantly increases performance and system versatility beyond VITA 74, while following its mechanical framework.
Status: VITA 90.0 is in public review for release. Working groups are developing drafts for each level of VNX+.
VITA 91: System Standard for Higher Density VITA 46 Applications
Abstract: This standard defines a system definition that provides higher pin density to the backplane for VPX applications.
Status: VITA working group to develop a new standard for higher pin density for VPX.
VITA 92: High Performance Cable – Ruggedized 10 Gbaud Bulkhead High Speed, D- Sub, Rectangular Connector for Copper Cables
Abstract: This standard defines a rugged standardized 10 Gbaud interconnect system with a high pin count and high-density, lightweight, rectangular connector (meets MIL-DTL-24308 physical envelope) for I/O. It can support multiple high- bandwidth protocols and power while optimizing SWaP [size, weight, and power] benefits in smaller systems with limited panel space availability.
Status: The working group is reviewing a draft document.
VITA 93.1: QTM – QMC I/O Transition Module
Abstract: This standard complements the VITA 93.0 QMC standard by detailing the mechanical design of a mezzanine card installed on a carrier card or rear-transition module, enabling the transition of QMC I/O signals to industry-standard connectors accessible through the carrier card’s or rear transition module’s front panel.
Status: Working group developing draft document.
VITA 94.0-2024xNew: Power Distribution Plug-In Module
Abstract: This standard provides requirements for building a power distribution plug-in module with digital controls that can be used in a VPX chassis. The plug-in module will fit within the standards envelope defined for VPX modules in the VITA 48.x standards.
Status: Working group is developing a draft document.
VITA 95.0: Circular 38999 Connector with EBO Fiber Technology
Abstract: This document defines a standard for circular connectors with Expanded Beam Optical (EBO) ferrules. Circular connector shells are compliant to MIL-STD-38999 Series III. EBO ferrules are available in multimode or single mode.
Status: Working group is developing a draft document.
VITA 96.0: Backplane Connectors with EBO Fiber Technology
Abstract: This document defines a standard for Backplane Connectors with EBO ferrules. EBO ferrules are available in multimode and single mode.
Status: Working group is developing a draft document.
VITA 100.x: VITA 100
Abstract: The VITA 100 suite of standards is an evolution to OpenVPX, VPX, and related mechanical standards while embracing a paradigm shift in technology and capability with at least double the pin density, speed, and power for electrical contacts.
Status: Working group is developing draft documents.
For a complete list of VITA standards available for purchase and their status, go to https://www.vita.com/Standards.
