|
|
TEWS TECHNOLOGIES, a leading provider of embedded I/O products, today announced the introduction of the TPMC685, a standard single-width 32 bit PMC module offering up to 128 bit of TTL I/O arranged in 16 x 8 bit ports. Designed for high-speed data acquisition and generation, the TPMC685 is ideal for applications in process control, simulation, test, transportation, and COTS. The TPMC685 is offered standard with extended temperature operation, rear I/O, and a 5 year manufacturer’s warranty. Software drivers for most major real-time operating systems are available.
The direction of the I/O lines on the TPMC685 is software programmable by port. Each port is built up using a TTL bus transceiver. Each line is protected against ESD and overvoltage. Software selectable pullup/pulldown resistors are available on all I/O lines. It is possible to read or write synchronously all 128 lines.
Each channel configured as an input can generate an interrupt, and signal edge handling is programmable to interrupt on either the rising and/or falling edge of the input signal. Interrupts can be enabled and disabled for each bit. An interrupt status register is provided for simplified interrupt source detection of each bit. To eliminate spikes and glitches, thereby keeping interrupts to a minimum, each port has its own user configurable input filter.
All outputs drive 5V TTL levels with up to 24mA.
The first 64 bits of TTL I/O are accessible via the front panel HD68 SCSI-3 type connector and the second 64 bits of TTL I/O via rear panel P14. TPMC685-11 provides 8 additional ground contacts on the P14 connector. These grounds reduce the number of Back-I/O lines to 56, but improve the signal integrity.
To deal with software faults, the TPMC685 provides a user configurable Watchdog timer. It can set all outputs in a user defined (save) state when the watchdog expires. Two Timers are included in the TPMC685 for easy implementation of equidistant input sampling or output setting.
About TEWS TECHNOLOGIES
TEWS TECHNOLOGIES is a leading solutions provider of embedded I/O and CPU products based on open architecture standards such as PMC, XMC, IndustryPack® (IP), CompactPCI, standard PCI, PCIe, AMC, FMC, and VME. TEWS has more than 30 years of experience designing and building turn-key embedded interface solutions using the philosophy to listen and respond to our customers’ needs. Using this ‘customer first’ approach, TEWS has developed a large number of standard and custom products for industrial control, telecommunication infrastructure, medical equipment, traffic control and COTS applications. TEWS’ line of embedded I/O solutions is available worldwide through a global network of distributors. For more information, go to www.tews.com
