Richardson, TX (May 16, 2006) – ASSET InterTech Inc., (www.asset-intertech.com) an international leader in boundary-scan (IEEE 1149.1/JTAG) test and in-system programming (ISP), and Firecron LTD (www.firecron.com) will demonstrate System-level JTAG (SJTAG) test and programming in a proof-of-concept system at the upcoming European Board Test Workshop, to be held in Chilworth, Southampton, UK on May 24-25.
SJTAG is an industry initiative begun a year ago with a goal of standardizing processes and methodologies for the deployment of system-level boundary scan (JTAG) applications. The SJTAG group is chaired by Dr. Ben Bennetts and is comprised of representatives from Motorola, Lucent, Ericsson and other leading technology firms. The SJTAG proof-of-concept system was created by ASSET and Firecron. It incorporates many of the design principles defined by the working group and is seen by the group as the first step toward an open-standard, non-proprietary implementation of system-level JTAG test and programming.
“We have working with Firecron and the SJTAG group for quite some time on open standards,” said Alan Sguigna, vice president of sales and marketing for ASSET. “System-level JTAG is becoming much more important to OEMs seeking higher degrees of fault tolerance and reliability within their systems, and vendor-independent implementations are key to opening that market.”
ASSET’s easy yet powerful ScanWorks boundary-scan test and ISP environment is currently used by leading electronics companies such as Cisco, Lucent Technologies, Agilent, BAE, Alcatel, Hewlett-Packard, Ericsson, Intel, Raytheon, SBS, Solectron, Rockwell Collins, EMC and others.
The SJTAG demonstrator consists of an ASSET ScanWorks boundary-scan system interacting with a Firecron embedded controller. Test vectors generated by ScanWorks are dynamically downloaded into the system with the Firecron embedded boundary-scan controller over a LAN/WAN Ethernet connection. The vectors are executed on the system and diagnostic data is sent back to the remote ScanWorks station for fault isolation and display.
“Adopting an SJTAG design is proven to save OEMs time and money, and reduces the No Fault Found (NFF) issue in the field,” said Eugene Mullen, vice president at Firecron. “Firecron is committed to this technology.”
About ASSET InterTech
ASSET InterTech, Inc. develops, markets, sells, and supports boundary-scan testability and in-system programming (ISP) products worldwide. ASSET’s affordable ScanWorks® JTAG test environment is easy yet powerful. It allows users to quickly and easily test semiconductors, circuit boards or entire systems during every phase of a product’s life, including design, manufacturing/repair and field maintenance. The ISP capabilities of ScanWorks can be used to load software or data into programmable devices after they have been connected to a printed circuit board. ASSET’s ScanWorks product family work in conjunction with a standard of the International Electronics and Electrical Engineering (IEEE) society known as the IEEE 1149.1 (JTAG) boundary-scan test specification. ASSET InterTech is located outside of Dallas, TX, at 2201 North Central Expressway, Suite 105, Richardson, TX 75080.
Firecron LTD is a world leader in the design and development of IEEE 1149.1 infrastructure products, providing “Design for Test” (DFT) solutions for the communications, military and industrial systems markets. Over the last five years Firecron has consistently developed world class products in its gateway, controller and sequencer products.
Founded in 2001, Firecron is headquartered in London at Devonshire House, 66 Church Street, Leatherhead, Surrey KT22 8DP, with design centers around the UK. The company is privately held. For product information, call +44 (0) 1372 477127, direct e-mail to [email protected] or visit the company’s Web site at www.firecron.com.
ASSET and ScanWorks are registered trademarks and the ASSET logo is a trademark of ASSET InterTech, Inc. All other trade and service marks are the properties of their respective owners.