VITA Technologies
  • VME
  • XMC
  • FMC
  • PMC
  • VNX
  • VPX
Menu
  • VME
  • XMC
  • FMC
  • PMC
  • VNX
  • VPX
  • Articles
  • White Papers
  • Products
  • News
Menu
  • Articles
  • White Papers
  • Products
  • News
  New Products  Saelig Introduces USB 3.0 SuperSpeed Isolator For Electrical Isolation of USB Ports
New Products

Saelig Introduces USB 3.0 SuperSpeed Isolator For Electrical Isolation of USB Ports

Saelig Co. Inc.Saelig Co. Inc.—November 29, 20180
FacebookTwitterPinterestLinkedInTumblrRedditVKWhatsAppEmail


Alldaq ADQ-USB 3.0-ISO series of USB 3.0 isolators

Alldaq ADQ-USB 3.0-ISO series of USB 3.0 isolators
More stories

Book your car park on EasyPark24!

October 3, 2018

Enea Simplifies Multicore Migration with New Software Platform

March 1, 2011

New Rugged GPGPU from Aitech Brings Exceptional Graphics Processing to Harsh Environments

November 4, 2013

Mercury Systems Announces Embedded Industry’s Most Powerful OpenVPX InfiniBand-based Processing Module for Advanced Radar and Other Compute-Intensive Applications

September 10, 2013

Saelig Company Inc. has introduced the Alldaq ADQ-USB 3.0-ISO series of USB 3.0 isolators, which support the full USB 3.0 SuperSpeed data rate of 5Gbit/s. This allows USB 3.0 SuperSpeed devices to be electrically isolated from a host PC or other peripherals at full performance. The re-clocking design guarantees a stable USB connection at all speeds. The ADQ-USB isolators can be used for the electrical isolation of USB measurement instruments to avoid ground loops to solve problems in industrial and automotive applications as well as in professional sound studios and event and show equipment.

The ADQ-USB 3.0-ISO isolators automatically detect SuperSpeed (5Gbit/s), High-Speed (480Mbit/s), Full-Speed (12Mbit/s) or Low-Speed (1.5 Mbit/s) connections. The model ADQ-USB 3.0-ISO-PS includes a +5 V power adapter with a lockable 5.5mm barrel connector (bayonet lock) for a safety. For industrial and automotive applications, the ADQ-USB 3.0-ISO-W version can accept 10 to 36 VDC from an external power source via a 2-pin lockable Phoenix-type connector to power devices with up to 900 mA. The external power input is protected against reverse polarity and short-circuits.

The isolation voltage between PC and USB device is 1kV (continuous) for the model ADQ-USB 3.0-ISO-PS and 1.0kV (< 60s) for the model ADQ-USB 3.0-ISO-W. The ESD protection of the data lines is ensured by transient-voltage-suppression diodes up to ±12kV (contact discharge) and ±15kV (air-gap discharge) according to IEC 61000-4-2. Without an external power supply the USB isolator can source up to 200mA at the device port. For USB devices requiring more current, the external power supply version ADQ-USB 3.0-ISO-W can provide 900 mA according to the USB 3.0 specification. The Alldaq USB 3.0 isolators are compatible with Windows, MAC OS and Linux systems, and downward-compatible with USB 2.0/1.1/1.0 equipment.

Housed in a robust aluminum housing with rubber bumpers and designed for an operating temperature from -20 to +70degC, the Alldaq USB 3.0-ISO isolators are suitable even for applications in harsh environments. An optional DIN rail mounting kit is also available for permanent installations.

The ADQ-USB 3.0-ISO can protect computers and USB devices effectively against interference voltages, while also eliminating ground loops. Typical applications include: electrical isolation between measurement instruments and PCs, rejection of ripple pickup in studio equipment, removing differing ground potentials in industrial control equipment, and protection against voltage peaks in automotive set-ups.

Compact in size (3.6” x 2.5” x 1.3” – L x W x H incl. rubber bumpers) and weight (4.5oz) the ADQ-USB 3.0-ISO series of USB3.0 isolators are made in Germany by Alldaq, a prominent manufacturer of a wide range of measurement solutions for use in industry, research, servicing, and education; they are available now from Saelig Company, Inc. Fairport NY.

FacebookTwitterPinterestLinkedInTumblrRedditVKWhatsAppEmail
Mercury Systems Receives $2.1M Order for BuiltSECURE Memory Devices
Support for RAD Studio 10.3 Rio in Updated EntityDAC by Devart
Related posts
  • Related posts
  • More from author
Articles

DÉJÀ VU – THE UBIQUITY OF VITA 57

August 23, 20230
Conferences and Awards

Attn. VITA members: Registration open for September 2023 VSO Face to Face

August 16, 20230
Press Release

TEWS Technologies’ Advanced FPGA Solution Empowers a Range of Digital and Analog Applications

August 16, 20230
Load more
Read also
Articles

DÉJÀ VU – THE UBIQUITY OF VITA 57

August 23, 20230
Conferences and Awards

Attn. VITA members: Registration open for September 2023 VSO Face to Face

August 16, 20230
Press Release

TEWS Technologies’ Advanced FPGA Solution Empowers a Range of Digital and Analog Applications

August 16, 20230
Eletter Products

SPONSORED: TXMC637 – Reconfigurable FPGA with Analog I/O and Digital I/O

August 9, 20230
Eletter Products

SPONSORED: SpaceVPX Solutions From Pixus Technologies

August 9, 20230
Eletter Products

SPONSORED: Chassis Management Family Ensures Efficient Operation in Systems Aligned to SOSA

August 8, 20230
Load more

Recent Posts

  • DÉJÀ VU – THE UBIQUITY OF VITA 57
  • Attn. VITA members: Registration open for September 2023 VSO Face to Face
  • TEWS Technologies’ Advanced FPGA Solution Empowers a Range of Digital and Analog Applications
  • SPONSORED: TXMC637 – Reconfigurable FPGA with Analog I/O and Digital I/O
  • SPONSORED: SpaceVPX Solutions From Pixus Technologies

Recent Comments

No comments to show.
  • Articles
  • White Papers
  • Products
  • News
Menu
  • Articles
  • White Papers
  • Products
  • News
  • VME
  • XMC
  • FMC
  • PMC
  • VNX
  • VPX
Menu
  • VME
  • XMC
  • FMC
  • PMC
  • VNX
  • VPX

© 2023 VITA Technologies. All rights Reserved.