HOUSTON–Aug. 17, 2005–VMETRO announces the immediate availability of a Serial FPDP IP core for use on its range of Xilinx Virtex-II Pro FPGA products. The combination of VMETRO hardware, Serial FPDP IP, and user programmable FPGAs enables high-performance, highly integrated solutions for a wide range of applications including signal processing, high speed data recorders, real-time imaging, and test systems relying on Serial FPDP I/O.
The SFPDP IP core is fully compliant with ANSI 17.1-2003 (Serial FPDP) and provides easy creation of point-to-point data links with a choice of 1.0625Gbps, 2.125Gbps, and 2.5Gbps FPGA RocketIO connections when using suitable host FPGA cards. Using fiber optic transceivers, these data links can range from just a few meters to more than 10km. All serial FPDP operating modes are supported, including simple unidirectional links, bi-directional links with dataflow control, copy mode, and copy-loop mode. These modes offer great flexibility in data transfer and allow for multiple end-points which is especially useful when simultaneously recording and processing raw data.
The IP core occupies only a small logic resource footprint in an FPGA; each Serial FPDP interface occupies around 1% of a Virtex II Pro version XC2VP70. This enables most of the FPGA to be used for user IP even if several Serial FPDP interfaces are required on a single device.
“We are seeing customers that have a need for front-end processing of their Serial FPDP data, such as collating data from several Serial FPDP links into a single data stream,” says Dave Barker, Vice President of Business Development for Processing Solutions at VMETRO. “This offering from VMETRO allows customers to integrate within a single FPGA their front-end processing logic with a fully compliant Serial FPDP core. For instance, customers can use a VMETRO PMC-FPGA03F Virtex-II Pro PMC to receive and perform the front-end processing of Serial FPDP data before sending it to a host CPU node for back-end processing.”
The Serial FPDP IP core is provided in an EDIF format with obfuscated source for simulation. The core can be implemented on VMETRO’s FPGA products such as the PMC-FPGA03/03F, the VPF1, and the 3CPF1 lines of air cooled and rugged/conduction cooled products. In addition, customers can implement the core into their own FPGA hardware such as a sensor that will be communicating via Serial FPDP to a VMETRO processing or recording system. Subject to licensing conditions, the core can also be used on non-VMETRO based FPGA products.
The Serial FPDP IP core is priced from US$6,000.
About VMETRO
VMETRO offers products and services that enable clients to build superior high-end digital processing, recording and sensor I/O systems for their customers, on time! The products are based on open standards like VXS, VME, PCI, cPCI and RACEway. Founded in 1986 in Oslo, Norway, and in the US since 1987, VMETRO is the world’s largest manufacturer of bus analyzers for standard buses such as VME and PCI. VMETRO also offers an extensive line of high-performance signal processing solutions, real-time data recorders, PMC I/O controllers and modules for real-time data processing, acquisition and networking. VMETRO merged with Transtech DSP Ltd (High Wycombe, UK) October 1, 2004, adding a powerful range of signal processing products to the VMETRO product range. VMETRO is traded on the Oslo Stock Exchange (OSE:VME). For more information, please visit www.vmetro.com